|
| See also Test Standards - Packaging |
| Standard |
Description |
| ASTM D4987 |
This test method covers the procedure for testing the tensile breaking strength of the perforations in one-part continuous forms paper. |
| ASTM D5803 |
This test method provides a quick, reliable means to measure the wet zero-span tensile strength of a specimen of sheeted material. |
| ASTM D5804 |
This test method provides a quick reliable means to measure the zero-span tensile strength of a randomly oriented specimen of fibers when dry. |
| ASTM D774 |
This test method covers measurements of the bursting strength of paper and paper products occurring as single or laminated flat sheets not over 0.6mm. (0.025 in.) in thickness having a bursting strength of 30 kPa up to 1400 kPa (4 psi up to 200 psi). |
| ASTM D828 |
This test method covers procedures for determining tensile properties of paper and paperboard. |
| ASTM D829 |
These test methods measure the (wet) tensile breaking strength of paper, paper products, and paperboard (excluding corrugated board) when saturated with water. |
|
|
| BS 2922-2:1984, ISO 3781-1983 |
Strength of wet paper and board. Method for determination of the tensile strength of paper and board after immersion in water. |
| BS 3748:1992, ISO 2493:1992 |
Method for determination of resistance to bending of paper and board. |
| BS 4415-1:1992, ISO 1924-1:1992 |
Determination of the tensile properties of paper and board. Constant rate of loading method. |
| BS 4816:1972 |
Method for the determination of the puncture resistance of board. |
| BS 7325:1990, ISO 9895:1989 |
Method for determination of the compressive strength of paper and board by the short span test. |
| BS EN 12625-4:1999 |
Tissue paper and tissue products. Determination of tensile strength, stretch at break and tensile energy absorption. |
| BS EN 12625-5:1999 |
Tissue paper and tissue products. Determination of wet tensile strength. |
| BS EN ISO 1924-2:1995 |
Paper and board. Determination of tensile properties. Constant rate of elongation method. |
| BS ISO 11093-6:1996 |
Paper and board. Testing of cores. Determination of bending strength by the three-point method. |
| BS ISO 11093-7:1997 |
Paper and board. Testing of cores. Determination of flexural modulus by the three-point method. |
| BS ISO 12192:2002 |
Paper and board. Compressive strength. Ring crush method. |
| BS ISO 1924-3 |
Paper and board. Tensile strength, strain at break, tensile energy absorption and tensile stiffness. Part 3. Constant rate of elong ation method (100 mm/min). |
|
|
| ISO 11093-6 |
Paper and board. Testing of cores. Part 6. Determination of bending strength by the three-point method. |
|
|
| T 809 |
Flat Crush of Corrugating Medium (CMT Test) |
| T 811 |
Edgewise Compressive Strength of Corrugated Fiberboard (Short Column Test) |
| T 818 |
Ring Crush of Paperboard |
| T 821 |
Pin Adhesion of Corrugated Board by Selective Separation |
| T 822 |
Ring Crush of Paperboard (Rigid Support Method) |
| T 825 |
Flat Crush Test of Corrugated Board (Rigid Support Method) |
| T 839 |
Edgewise Compressive Strength of Corrugated Fiberboard Using the Clamp Method |
|
|
| DD ENV 12448:1997 |
Paper. Printing and business paper. Determination of the coefficient of static friction. |