 |
|
|
 |
|
 |
Eye End Adapters
|
|
AMETEK supplies a variety of thread eye adapters and anchor pins for connecting testing fixtures to your force gauge, load cell sensor and force tester. These adapters are used with fixtures that attached to your instrumentation with a grip pin and locking rings. They have no threads for connecting to a device.
Eye end adapters, also known as anchor pins, will typically have a 5/8” diameter (15.9mm) or 1-14” (31.8mm) diameter. These accessories are generally made of aluminum (low force applications) or stainless steel.
|
|
 |
EYE ADAPTERS -
SPECIFICATIONS |
|
|
|
 |
Model |
|
Load Capacity |
|
Thread Type |
|
Diameter |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
 |
| Eye End Adapter |
|
|
|
|
|
|
| NC003140 |
|
110 lbf (500N) |
|
#10-32F |
|
5/8” |
|
|
|
|
| NC003137 |
|
225 lbf (1kN) |
|
¼-28M |
|
5/8” |
|
|
|
|
| NC003138 |
|
1100 lbf (5kN) |
|
½-20M |
|
5/8” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EYE ADAPTERS -
ORDERING |
|
|
|
|
Model |
|
Description |
|
|
|
|
|
|
|
| Load Cell Eye End Adapters |
|
| NC003139 |
|
#10-32M thread, with 5/8” eye end, aluminum |
|
|
| NC003137 |
|
5/16-18M thread, with 5/8” eye end, stainless steel |
|
|
| NC003138 |
|
½-20M thread, with 5/8” eye end, stainless steel |
|
|
|
|
|
|
|
| Locking Rings |
|
|
| NC003140 |
|
¾-16 thread, aluminum |
|
|
| NC003131 |
|
M24 thread, stainless steel |
|
|
|
|
|
|
|
| Grip Pins |
|
|
|
|
| NC003141 |
|
Grip pin, 2.7” x 0.5”, aluminum |
|
|
| NC000612 |
|
Grip pin, 78.5mm x 12mm, steel |
|
|
|
|
|
|
|
| Spanner Wrench |
|
|
| NC003030 |
|
Spanner wrench, used for tightening locking rings to testing fixtures. |
|
|
|
|
|
|
|
|
|