NEXYGEN^TM MT Software
Adhesives - Pull Off Test

This NEXYGEN MT test is used to determine the minimum tensile stress necessary to break the weakest interface (adhesive failure) or the weakest component (cohesive failure) of the test assembly. Upon completion of the test, the operator will be prompted to enter the percentage area and site of fracture in the sample in terms of adhesive and/or cohesive failure.

This test complies with BS EN 24624, ISO 4624.

Test results include:

• Date
• Time
• User Name
• Sample Pass/Fail
• Sample Information
• Cylinder Diameter
• Preload Value
• Stress
• Rate
• Batch Reference
• Sample Reference
• Breaking Strength
• Nature of Failure

Nexygen MT|