Chatillon® X-3328 Series
Digital Force Gauge for Load Comparison

The Chatillon® X-3328 Series is ideal for job task analysis and ergonomic evaluations. Simplicity was a key design criteria for both clinicians and technicians. Measurement accuracy is better than 0.1% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of measurements including normal and peak readings, force measurement comparisons, pass/fail results, statistical results, load averaging, load comparisons, measurement actuation and direction. Measurements are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be “hidden” during testing. Gauge is supplied with Certificate of Calibration.

The use of a digital force gauge may be regulated for use by respective regional health agencies. Please check with your local health agencies for applicability or restrictions.

Standard Gauge Measurement Functions

  • Load Comparison
  • Load Limits
  • Peak Load
Ordering Information
Model
lbf
kgf
N
X3328-100
100 x 0.01
50 x 0.005
500 x 0.05
X3328-200
200 x 0.02
100 x 0.01
1000 x 0.1
X3328-500
500 x 0.05
250 x 0.02
2500 x 0.2

Accessories
Standard Accessories
Part No.
Capacity
Thread
Hook with Latch NC002500
500 lbf
5/16-18F
V-Notch Fixture, Large NC000725
500 lbf
 5/16-18F
V-Notch Fixture, Small NC000721
500 lbf
 5/16-18F
Extension Rod, 6-inch SPK-FMG-013B
500 lbf
 5/16-18
Curved Compression Fixture SPK-FMG-142
500 lbf
 5/16-18F
Compression Plate, Flat SPK-FMG-143
500 lbf
 5/16-18F
Palm Fixture (Mushroom) SPK-FMG-144
500 lbf
 5/16-18F
Compression Plate, Small (Rectangular) SPK-FMG-145
500 lbf
 5/16-18F
Grasping Loop NC002844
500 lbf
-
Knurled Nut NC000857
-
5/16-18F
Pistol Grip SPK-FMG-141
-
-
Handle Assembly SPK-DF-HANDLE
-
-
Battery Eliminator, 120/230V SPK-DFX-UBE
Carrying Case SPK-FMG-149

Application Information
Click here to learn more about muscle strength testing, job task analysis, functional capacity evaluations and other medical, occupational and sports medicine testing.

spec sheet | manual | parts list | trade in | repair | calibrate | purchase

AMETEK TCI Division • Chatillon Force Measurement Systems
8600 Somerset Drive • Largo, Florida 33773 • United States of America
Tel +1-727-536-7831 • Tel +1-800-527-9999 (USA Only)