 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Chatillon® K-DFE Series
Digital Force Gauge for Functional Evaluations
The Chatillon® K-DFE Series is ideal for functional capacity evaluations. This compact, easy-to-use force gauge is features a load averaging function ideal for job task analysis and functional capacity evaluations. Averaging can be based on a load setpoint with hold time. Simplicity was a key design criteria for both clinicians and technicians. Measurement accuracy is better than 0.1% full scale. A large, easy-to-read, high resolution dot matrix LCD display is easy to read. The gauge displays normal and peak readings, pass/fail results and statistics based on up to 10 stored results. Measurements are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be “hidden” from the patient during testing. Digital output (RS232) is standard. Gauge is supplied with Certificate of Calibration.
The use of a digital force gauge may be regulated for use by respective regional health agencies. Please check with your local health agencies for applicability or restrictions.
Standard Gauge Measurement Functions
- Functional Capacity- Time Based
- Functional Capacity - Strength/Force Based
- Peak Strength/Force
Ordering Information
|
Model
|
lbf
|
kgf
|
N
|
|
K-DFE-100
|
100 x 0.1
|
50 x 0.01
|
500 x 0.1
|
|
K-DFE-200
|
200 x 0.1
|
100 x 0.1
|
1000 x 1
|
|
K-DFE-500
|
500 x 0.1
|
250 x 0.1
|
2500 x 1
|
Accessories
| Standard Accessories |
Part No.
|
Capacity
|
Thread
|
| Hook with Latch | NC002500 |
500 lbf
|
5/16-18F
|
| V-Notch Fixture, Large | NC000725 |
500 lbf
|
5/16-18F |
| V-Notch Fixture, Small | NC000721 |
500 lbf
|
5/16-18F |
| Extension Rod, 6-inch | SPK-FMG-013B |
500 lbf
|
5/16-18 |
| Curved Compression Fixture | SPK-FMG-142 |
500 lbf
|
5/16-18F |
| Compression Plate, Flat | SPK-FMG-143 |
500 lbf
|
5/16-18F |
| Palm Fixture (Mushroom) | SPK-FMG-144 |
500 lbf
|
5/16-18F |
| Compression Plate, Small (Rectangular) | SPK-FMG-145 |
500 lbf
|
5/16-18F |
| Grasping Loop | NC002844 |
500 lbf
|
-
|
| Knurled Nut | NC000857 |
-
|
5/16-18F
|
| Pistol Grip | SPK-FMG-141 |
-
|
-
|
| Handle Assembly | SPK-DF-HANDLE |
-
|
-
|
| Battery Eliminator, 120/230V | SPK-DFX-UBE | ||
| Carrying Case | SPK-FMG-149 |
Application Information
Click here to learn more about muscle strength testing, job task analysis, functional capacity evaluations and other medical, occupational and sports medicine testing.
spec sheet | manual | parts list | trade in | repair | calibrate | purchase
 |
|
 |
|
AMETEK TCI Division • Chatillon Force Measurement Systems
8600 Somerset Drive • Largo, Florida 33773 • United States of America
Tel +1-727-536-7831 • Tel +1-800-527-9999 (USA Only)
