 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Chatillon® LG Series
Mechanical Force Gauge
The Chatillon® LG Series mechanical force gauge is ideal for tensile or compression force measurement applications up to 100 lbf, 50 kgf or 500 N. This unidirectional force gauge has one end dedicated to tensile tests and the other dedicated to compressive tests. The gauge features a large 2-1/4-inch dial which rotates 360-degrees for taring. A peak hold button is easy to use- it holds the pointer at the peak load. The LG Series has a force measurement accuracy of better than 0.5% full scale and included mechanical overload protection. The gauge is available in lbf, kgf and N units. The gauge comes with a Certificate of Calibration with NIST data, accessories and carrying case.
Standard Gauge Measurement Functions
- Tensile Load (one direction dedicated to pull)
- Compression Load (one direction dedicated to push)
- Peak Tension or Compression Load (switch activated)
Models
| Model |
Capacity
|
Model |
Capacity
|
Model |
Capacity
|
| LG-002 |
2 lb x 0.01 lb
|
LG-1KG |
1 kg x 0.005 kg
|
LG-10N |
10N x 0.05N
|
| LG-005 |
5 lb x 0.025 lb
|
LG-2KG |
2 kg x 0.01 kg
|
LG-20N |
20N x 0.1N
|
| LG-010 |
10 lb x 0.05 lb
|
LG-3KG |
3 kg x 0.015 kg
|
LG-30N |
30N x 0.15N
|
| LG-020 |
20 lb x 0.1 lb
|
LG-4KG |
5 kg x 0.025 kg
|
LG-50N |
50N x 0.25N
|
| LG-030 |
30 lb x 0.15 lb
|
LG-10KG |
10 kg x 0.05 kg
|
LG-100N |
100N x 0.5N
|
| LG-050 |
50 lb x 0.25 lb
|
LG-20KG |
20 kg x 0.1 kg
|
LG-200N |
200N x 1N
|
| LG-075 |
75 lb x 0.375 lb
|
LG-30KG |
30 kg x 0.15 kg
|
LG-300N |
300N x 1.5N
|
| LG-100 |
100 lb x 0.5 lb
|
LG-50KG |
50 kg x 0.25 kg
|
LG-500N |
500N x 2.5N
|
Common Accessories
| Type | Part No. |
Capacity
|
Thread
|
Mates To
|
|
| Chisel Point | SPK-FMG-008A |
100 lbf
|
#10-32F
|
#10-32M
|
|
| Point | SPK-FMG-009A |
100 lbf
|
#10-32F
|
#10-32M
|
|
| Notch | SPK-FMG-010A |
100 lbf
|
#10-32F
|
#10-32M
|
|
| Flat | SPK-FMG-011A |
100 lbf
|
#10-32F
|
#10-32M
|
|
| Hook | SPK-FMG-012A |
55 lbf
|
#10-32M
|
#10-32F
|
|
| Hook | SPK-FMG-012B |
100 lbf
|
#10-32M
|
#10-32F
|
|
| Extension Rod | SPK-FMG-013A |
100 lbf
|
#10-32F
|
#10-32M
|
|
| Carrying Case | NC002710 |
-
|
-
|
-
|
-
|
The accessories listed above are supplied standard with the LG force gauge. The LG force gauge has a #10-32M thread. Accessories are capacity dependent- only one accessory of a like type is supplied based on the force gauge capacity ordered.
For a complete list of gauge accessories, click here.
Do you want to use your force gauge with a force tester, click here.
The LG Series replaced these force gauge models:
- Chatillon DPP Series
spec sheet | manual | parts list | trade-in | repair | calibrate | purchase
 |
|
 |
|
AMETEK TCI Division • Chatillon Force Measurement Systems
8600 Somerset Drive • Largo, Florida 33773 • United States of America
Tel +1-727-536-7831 • Tel +1-800-527-9999 (USA Only)
